Chalk style paint behaves differently from conventional paint since it has a mineral content that places it closer to lime wash than to latex paints. With a fast drying time and the option of a final wax finish, chalk paint tends to operate under its own set of rules. With these tips, though, you can easily create unique refreshed furniture with a stunning look—and with that signature chalk paint velvet texture.
Go Easy on the Prep Work
Paint guides typically stress the need for extensive cleaning and other prepping of surfaces before applying paint. Yet if there’s one aspect of painting that most people don’t like, it’s the prep work. So, you might be delighted to learn that chalk paint is remarkably good at sticking to problem surfaces. Sanding, cleaning, and priming can be avoided in most instances—especially helpful with old, antique pieces that you may have picked up along the way. Clean and sand when you have surface-threatening issues like:
Heavy greaseWood sapMoss or dried mossMildew or mold spots
Use Different Brush Strokes for Varied Effects
Be creative with your chalk paint brush strokes for entirely different looks. For all stroke techniques, complete a local area before moving to the adjacent area. Be sure to work rapidly.
Cross-hatch: For a faux linen effect, brush an area vertically and follow on top with horizontal strokes. Stipple: To create low peaks and valleys, lay down the paint thickly in a small area and follow by dabbing with the bristles. Feather: For a smooth surface, brush the paint in a small area and quickly follow with additional delicate parallel strokes on top.
Distress Carefully With Fine Sandpaper
Distressing is a technique that creates the illusion of age on wood surfaces. Avoid distressing all areas of the furniture equally. Instead, think about authentic vintage furniture and these pieces would have been used. Wrap fine-grit sandpaper such as #220 around a wood block or purchase a foam sanding block. Apply light pressure when sanding these areas, since you can always go back and intensify the distressed areas with more sanding. This looks especially nice on items like candlesticks and dressers.
Apply Thin Coats of Chalk Paint on Slick Surfaces
Wood’s open pores are ideal for capturing paint and helping it firmly stick. Slick, shiny items such as honed stone, metal, and ceramic tile lack pores, so you must apply the chalk paint with a different technique. After thinning down the chalk paint with water, apply a thin coat to the work material, brushing in all directions. Make sure that the entire surface is covered. After letting the paint dry for several hours, thin down the paint in the can if needed and apply a light feather coat to the surface. Smooth away brush marks by feathering lightly with the top of the brush.
Create a Two-Color Distress for Greater Depth
Chalk-painted furniture with eye-catching depth is often achieved with the two-color distress technique. Sanding sections of single-layer paint reveals only wood underneath. Yet by laying down two different colors and delicately sanding down key sections of the top paint layer, you will expose that lower color layer, not wood. Using a darker color for the bottom layer will produce maximum depth when contrasted with a lighter top layer.
Apply Wax for a Supple Texture
Chalk paint alone results in a texture that, true to its name, feels chalky and dry. An application of special chalk paint wax protects the finish and gives it a pleasing soap-like feel. Apply the wax with a brush or lint-free cloth. Wipe off excess wax with a fresh lint-free cloth. The wax will look white in the container but it applies clear, so do not worry about its initial appearance.
Dry-Brush to Blend Top and Bottom Colors
When the piece has an existing lower color that you would like to blend with an upper color, use the dry-brush technique. Touch the tips of the bristles into the chalk paint. Remove from the paint and hold the brush away from the workpiece for a few seconds to allow the chalk paint to reach a drier consistency on the brush. Then firmly brush over the work surface. Since the chalk paint is fairly dry, it is virtually impossible to ruin the lower level with too much paint.
Obtain an Ultra-Smooth Finish by Sanding
Though chalk paint is often associated with a heavily textured, weathered look, it can also go in the other direction and produce a sleek appearance for surfaces such as cabinet doors. Chalk paint’s mineral content makes it easy to sand down, and this is key to producing a smooth finish. The idea is to sand the chalk paint with gradually finer grits of sandpaper until the final grit is relatively smooth.
Easily Thin or Thicken Chalk Paint
Chalk paint is water-based, rendering it easy to thin and thicken. Thin the chalk paint with small amounts of cool water. Slowly stir the paint while adding the water. Unlike latex paint, which develops a skin when the paint can lid is left open, chalk paint has no such properties. This means that you can thicken it simply by leaving the lid open, then stirring. During this time, water evaporates from the mixture, slightly changing the ratio of chalk paint mix to water. Another way to thicken chalk paint is to add more dry mixture. This isn’t possible if you purchased pre-mixed chalk paint. But if you bought it as a dry mix, simply tap in a little extra dry mix while stirring.
Consider All Brands of Chalk-Style Paint
In 1990, Annie Sloan created Chalk Paint in part because she needed a paint that would dry extremely fast. Even though her company is the only one that makes the product called Chalk Paint, other paint manufacturers have since developed similar chalk-style paint products.
The Spruce Best Home Chalk Style Paint (see the colors) Behr Chalk Decorative Paint and Wax Valspar Chalky Finish Paint Rust-Oleum Chalked Ultra-Matte Paint Chalky Chicks Furniture Paint
