Here’s how to make permanent marker stay on fabric in four simple steps.
How to Get Permanent Marker to Stay on Fabric
Be sure to protect your marker design on the fabric from additional moisture, such as rain and sweat, until you can take steps to preserve it. Aim to preserve it as soon as possible after you create your design. Here’s how: An alternate method to using an iron is to toss the marked fabric into the dryer. Set the cycle to the highest temperature recommended for the fabric, and tumble for at least 15 minutes. This will help to set the ink into the fabric fibers. However, the ironing method does this in a more targeted manner. Furthermore, don’t spray the design with a commercial fabric protector because this can cause the ink to run. It is also best to avoid washing the fabric unless you really need to. For washing, turn the fabric inside-out if possible, so the marked portion is on the inside. Use only cold water and gentle detergent; the fabric can be dried in the dryer or hung to air dry. Note that hats should be spot-cleaned or hand-washed.
Fabric Display and Storage Tips
If you’ve chosen to frame your fabric design or put it in a display box, be sure to keep it out of direct sunlight. Even lamps and overhead lights can cause fading. The piece also should be displayed or stored in a room that has consistent humidity and temperature. For storage, use archival tissue paper to wrap the fabric. The tissue must be both acid-free and lignin-free (a chemical compound derived from wood). It is also important to use the right type of storage container to prevent yellowing. One choice is an archival storage box. These boxes are usually made of acid-free paper. However, if you are concerned about the box getting crushed, purchase a plastic storage container. The box should be made of cast polypropylene to be safe for your keepsakes.
